Built-in 6000mA Battery DC12V Intelligent Digital Display Inflatable Pump Car Bicycle Air Pump

Bullet Points：

Vehicle charging: 12V / 3A

Input voltage: 5V / 12A

Air efficiency: 2 minutes

Illumination: 10 hours

Charging: micro USB

Instructions For Use:

1. Insert the pin on one end of the charger into the car USB beforehand, and the other end into the USB socket on the top of the air pump to control the air pump. The normal charging time is the first time after charging for 4 hours.

2. Connect one end of the tire inflation fitting to the air cylinder and the other end to the tire valve core, then press the reverse button below. Please note that the order of the connections is important; At the same time, note that there are two types of pipe joints, American and French. The joint of the trachea itself is American, and the independent French joint is screwed to the American joint.

3. Power button on, LCD display starts to display, press again to start conversion between PSI, BAR, KAP, KG/CM four units, select the unit you want, set button to set the air pressure value you need, And finally press the lower power switch starts to inflate, and when inflated, the lower LED of the air cylinder is bright.

4. Set button to set pressure value adjustment button, press for slow adjustment, long press for fast adjustment, adjust to the corresponding press value of the inflation object; pressure value flashes for 4 seconds, automatically set, or press the switch to set.

5. press the power button. When the inflation pressure reaches the pressure value you set, the smart air cylinder will automatically stop the inflation work immediately, but the LED light is still on, and then the power switch is pressed to turn off the light.

6. When the inflation is over, quickly turn the tire inflation joint out of the valve core or the counterclockwise. Before unscrewing the screws, carefully put the tire inflation joints hot; if there is a small leak at the moment, it is normal.

7. If it is judged that the tire pressure is too high, the tire tire inflation joint can be deflated at a suitable position on the valve core.

8. Unscrew the tire inflation assembly from the main unit, place it in the storage tank at the bottom of the air cylinder, and place the air cylinder in a safe, dry and ventilated position.

Package Included：

1 x Mini Portable Electric Air Pump

Notes:

Please allow 1-3cm deviation due to manual measurement.

Due to the different monitor and light effects, the actual color of the item might be slightly different from the color shown on the pictures.